Справочник Пользователя для Mercedes Benz 2004 c 240

This vehicle is equipped with two LATCH- 
(Lower Anchors and Tethers for CHildren) 
type anchors (at each of the outer rear 
seats) for the installation of a LATCH-type 
child seat with the matching mounting 
fittings.

If a child seat is not installed, the 
LATCH-type anchors can be folded back 
between the seat cushion and the 
backrest.

1 Anchors
2 Button

왘

Grip inner side of anchors 1 and fold 
forward until they audibly lock in place.

왘

Install child seat according to the 
manufacturer’s instructions.

왘

Press down button 2 on each anchor 
and return anchor 1 to its catch.

i

The child seat must be firmly attached 
in the right and left side anchors 1.

With a child seat installed in the left 
rear seat, the seat belt for the center 
seat occupied by a passenger must op-
erate freely. Guide seat belt between 
its seat cushion mount and backrest 
mount along outside of right side child 
seat anchor.

i

Non-LATCH-type child seats may also 
be used and can be installed using the 
vehicle’s seat belt system. Install child 
seat according to the manufacturer’s 
instructions.

G

Children too big for child restraint systems 
must ride in back seats using regular seat 
belts. Position shoulder belt across chest 
and shoulder, not face or neck. A booster 
seat may be necessary to achieve proper 
belt positioning for children from 41 lbs until 
they reach a height where a lap/shoulder 
belt fits properly without a booster.

Before installing the child seat, make sure 
anchors 1 are folded out and locked in 
place.

Install child seat according to manufactur-
er’s instructions.

컄컄