Справочник Пользователя для Mitel 3000 5330

Mitel 5330/5340 IP Phones – User Guide 

•  When a Direct Page arrives, the MUTE key light turns OFF and a Handsfree call is 

automatically established.  

To turn Handsfree Answerback off:  

•  Press the flashing   (MUTE) key once. The MUTE key light turns OFF.  
•  To respond to a Direct Page when Handsfree Answerback is OFF, see "Direct Page - 

Handsfree Answerback Disabled" elsewhere in this guide. 

Note: By default, Handsfree Answerback is turned OFF at your phone. If the 

 (MUTE) key is 

OFF when your set is idle, Handsfree Answerback is OFF.  

To answer a call using Handsfree Answerback:  

Phone state before Page arrives 

Phone is idle and MUTE  
is flashing 

1. Check that MUTE is OFF.  

2. Listen for the paging party.  

3. Begin speaking.  

4. Lift the handset if you wish to switch from a 

Handsfree call to a handset call. 

You are on a handset or headset call, 
and MUTE is OFF 

1. Check that MUTE is flashing.  

2. Press MUTE. The light turns ON solid, and you are 

now speaking to the paging party and have muted 
your handset/headset call.  

3. Speak to the paging party. Press MUTE to alternate 

between handset/headset and handsfree calls. 

You are on a MUTED 
handset/headset call, OR, you are on 
a Handsfree call 

The party paging you receives a busy tone. Handsfree 
Answerback does not interrupt your call. 

To end a Handsfree Answerback call:  

• Press 

either   (SPEAKER) or 

 (CANCEL).  

When the Handsfree Direct Page call ends, the MUTE key light returns to the state it was in 
before the call was established.  

Your administrator enables or disables Handsfree Answerback and you can also turn it on or off 
on your phone. To turn Handsfree Answerback off, see "Direct Paging - Handsfree Answerback 
Enabled" elsewhere in this guide. When Handsfree Answerback is disabled on your phone and 
you receive a Direct Page, the Direct Page is indicated by a single burst of tone.