Справочник Пользователя для Mitel 3000 5330

Mitel 5330/5340 IP Phones - User Guide 

Trunk Flash  
The Trunk Flash feature allows you to access Centrex features (if available) while you are talking 
on an outside call.  

To flash a trunk while talking on an outside call:  

1.  Press the key you have programmed as Flash. 

Note: You can program a key to single flash or double flash.  

2.  Wait for dial tone. 

3.  Dial the Centrex feature access code. 

Your phone uses the 5310 IP Conference Unit for conferencing. You use the Conference 
Controller to turn the conference unit off or on, to adjust the volume or to put the conference unit 
into Presentation mode. You can only run one Conference Controller session at a time. If the 
5310 Conference Unit is not connected to your phone, the Conference Controller application is 
not available.  

To access the Conference Controller:  

1. Press 

Applications and press Conference Unit, or 

2.  Press the key you have programmed to the Conference Unit application. 

1.  Verify that the conference unit is connected to your phone. 

2.  Access the Conference Controller. 

3. Press Turn On/Turn Off. While the Conference Unit is on, the 

 

icon shows in the 

phone status line. 

•  Press Volume Up or Volume Down.  

Place the conference unit in Presentation mode  
Presentation Mode is used when only one individual is speaking to a group. If another member in 
the group wishes to speak, you must disable Presentation Mode. Presentation Mode minimizes 
extraneous noise.  

To place the conference unit in Presentation mode:  

• Press 

Presentation Mode.  

Exit the conference controller  
To exit the conference controller:  

• Press 

Close.  

Mute the conference unit  
To mute the conference unit so that conversation in the meeting room cannot be heard by 
individuals being conferenced:  

• Press 

Mute.