Справочник Пользователя для Mitel 3000 5330

Mitel 5330/5340 IP Phones - User Guide 

indicator. At this point, you can press the key for the paired device to display the 
battery level, protocol, firmware, hardware, and IPEI information for the device. 

− Press 

Close to exit. 

To unpair a cordless accessory: 

1. Press 

Applications and then press Cordless Devices. 

2.  Press the device name that you want to unpair. The information screen for the selected 

device appears. 

3. Press 

Unpair this Device. If the accessory is in use, an error message is displays. 

Otherwise, the accessory is unpaired, removed from the display, and can no longer be 
used to interact with the phone. 

4. Press 

Close. 

For more information about the Cordless Devices Application, see page 46. 

The Cordless Module has a blue light-emitting diode (LED) that indicates the current status of the 
module (See Figure 1): 

Solid 

Audio is active between the module and either the handset or headset. 

Blinking 

Pairing mode is active or a firmware upgrade is in progress. 

Off 

No audio is active. 

Solid for 2 seconds 

Pairing is successful. 

Blinking: LED is On and Off for equal amount of time