Справочник Пользователя для Mitel 3000 5330

Mitel 5330/5340 IP Phones – User Guide 

The handset has two LEDs: 

•  Blue – indicates the operational status of the handset 

•  Green – indicates the status of the electrical charge of the battery 

Solid 

Handset is muted 

Blinking 

Handset is in pairing mode  

Winking 

Active audio path between Handset and Module 

Blue 

Off 

•  No audio path between Handset and Module OR 
•  Battery is dead 

Solid 

Battery is fully charged 

Blinking 

Battery is charging 

Green 

Off 

When handset is cradled and the LED does not flash or 
illuminate, this indicates an absence of battery power. 
During the first 30 – 60 minutes that the light is off, the 
battery may be trickle charging. If that is the case, the 
LED will resume normal behavior within that 60 minute 
period. If the LED remains off for more than 60 minutes, 
then either the battery is no longer chargeable or there is 
a problem in the charging circuit. 

Blinking: LED is On and Off for equal amount of time 
Winking: LED is On for a short period of time and Off for a longer period 

To check the battery level, do either of the following: 

• Press 

Applications, and then press Cordless Devices. The battery level is displayed 

beside the paired accessory. 

• Press 

Applications, then Cordless Devices, and then press the key for the cordless 

accessory. The battery level is displayed along with protocol, firmware, hardware, and 
IPEI information. 

Note: The cordless handset battery is not user-replaceable. 

To view cordless accessory protocol, firmware, and hardware information: 

• Press 

Applications, then Cordless Devices, and then press the key for the cordless 

accessory. The battery level is displayed along with protocol, firmware, hardware, and 
IPEI information.