Справочник Пользователя для Mitel 3000 5330

Mitel 5330/5340 IP Phones - User Guide 

There are two LEDs associated with the cordless headset: 

•  A blue LED on the headset indicates the headset status 
•  A green LED in the headset charging cradle indicates battery status 

Solid 

Headset mic is muted 

Blinking 

Headset is in pairing mode 

Winking 

Active audio path between Headset and Module 

Solid for 2 
seconds 

•  Pairing successful OR  
•  New battery installed 

Blue 
(on headset) 

Off 

•  No audio path between Headset and Module OR 
•  Battery is dead 

Solid 

Battery is fully charged 

Blinking 

Battery is charging 

Winking 

Indicates low voltage when headset is uncradled 

Green  
(on cradle) 

Off 

When headset is cradled, indicates battery is not charging.

Blinking: LED is On and Off for equal amount of time 
Winking: LED is On for a short period of time and Off for a longer period 

To check the battery level, do either of the following: 

• Press 

Applications, and then press Cordless Devices. The battery level is displayed 

beside the paired accessory. 

• Press 

Applications, then Cordless Devices, and then press the key for the cordless 

accessory. The battery level is displayed along with protocol, firmware, hardware, and 
IPEI information. 

Replacing Batteries in Cordless Accessories  
To replace headset battery: 

1.  Unclip the battery pack from the ear/head/neck piece. 

2.  Slide the battery pack off the headset. 

3.  Slide the new battery pack onto the headset. The blue headset LED indicator illuminates 

for two seconds to confirm successful battery replacement. 

4.  Re-clip the ear/head/neck piece to the battery pack. 

Do not expose batteries to heat or puncture them. Dispose of the product and/or batteries 
according to local standards and regulations. 

Note: The cordless handset battery is not user-replaceable. 

To view cordless accessory protocol, firmware, and hardware information: 

• Press 

Applications, then Cordless Devices, and then press the key for the cordless 

accessory. The battery level is displayed along with protocol, firmware, hardware, and 
IPEI information.