Справочник Пользователя для Mitel 5312

5312 and 5324 IP Phone SIP User and Administrator Guide 

The 5324 IP Phone supports a maximum of four held calls at the same time. The 5312 IP 
Phone supports a maximum of two held calls.  

When you place a call on hold, or when another party puts you on hold, the on-hold beep 
reminds you that you are holding or on hold. If the handset is in its cradle, you hear the beep 
through the handsfree speaker. You can turn off this beep, if desired. 

Note:  You cannot change your hold settings while on a call. 

• Press 

 (HOLD). The associated Line key flashes.  

•  Press the associated flashing Line key. The Line key changes from flashing to lit solid. 

• Access 

the 

Feature Configuration page of the Web Configuration (see Accessing the 

Web Configuration Tool on page 7). 

Call Forward redirects incoming calls to your voice mailbox (by default) or to an alternate 
number. Choose from the following Call Forward options: 

•  Call Forward – Always redirects all incoming calls  
•  Call Forward – No Answer redirects calls if you don’t answer after the programmed 

number of rings (1 – 10) 

•  Call Forward – Busy redirects calls when all lines are busy.  

All Call Forward options are OFF by default. You can turn on Call Forward No Answer and 
Call Forward Busy at the same time.  

Note:  You cannot change your Call Forward settings while on a call.  

Note:  To program and enable or disable Call Forward using the Web Configuration Tool, 

access the tool’s Feature Configuration page (see Accessing the Web Configuration 
Tool on page 7). 

1. Press   (SUPERKEY), and then press >> until FEATURES? appears. 

2. Press 

OK.  CALL FORWARDING? appears.  

3. Press 

OK. FWD ALWAYS: <current status> appears.