Справочник Пользователя для Mitel 3000 5330

5330/5340 IP Phones – User Guide 

 64 

 

 

To mute the conference unit so that conversation in the meeting room cannot be heard by 
individuals being conferenced:  

•  Press Mute.  

Your phone supports the Mitel Line Interface Module. The Line Interface Module allows you to 
make and receive calls over an analog line (Line Interface Module line) connected to your phone. 
The Line Interface Module operates in either of the following two modes, as determined by your 
System Administrator:  

•  Line Interface Module Mode: your phone allows you to use the Line Interface Module 

line at any time  

•  Failover Mode: you can use the Line Interface Module line only when the IP connection 

has failed   

Note: Handsfree and on-hook dialing are not supported on the Line Interface Module line.  

For information on emergency number dialing using the Line Interface Module, refer to 
Emergency Calls.  

To make a call using the Analog line:  

1.  Lift the handset. 

2.  Press the key you programmed as Analog Line. 

ANALOG CALL is displayed.  

3.  Dial the number. 

Note: When you make an external call over the analog line, a prefix dialing number is not 
required. If your phones Analog Line key has the Privacy option enabled, you cannot access the 
analog line when another phone is using the analog line (key is solid orange).To access the 
analog line, the user of the other phone must first hang up. To determine whether the Privacy 
option is enabled, contact your System Administrator.  

To answer a Call using the analog line:  

1.  Lift the handset. 

2.  Press the Analog Line key that is highlighted.