Справочник Пользователя для Motorola motonav tn500 series

install the car kit

Reconnect battery to vehicle.

Failure to follow these steps may cause the harness 

not to work properly and could damage the harness.

install with third-party vehicle 
specific harness 

Some vehicles require a vehicle-specific harness (not 

supplied) that allows integration of the harness into 

the vehicle entertainment system. The connectors on 

the ISO interface cable are designed to connect 

directly to such a third-party harness. If you choose to 

use a vehicle-specific harness, follow the guidelines 

that came with the harness.

install the microphone

Caution: The location of the MOTONAV device must 

not interfere with the vehicle's air bag deployment. 

Also, the microphone cable should not pass in front of 

or interfere with the deployment of any vehicle 

airbags. In particular, side airbags located with the 

windshield pillar or door jamb.

Mount the microphone in a suitable location using 

either the screw, velcro, or clip.

The preferred spot to mount the microphone 

is on the overhead console/dome light 

assembly near the front center of the vehicle, 

away from the window, pointed toward the 

driver's mouth.

Locate the microphone no more than 16 

inches (40 cm) from the driver.

Do not allow anything (such as a rear-view 

mirror or sun visor) to block the path between 

the microphone and the driver.

Mount the microphone firmly so that 

vibrations do not affect audio quality.

Refrain from locating the microphone directly 

in the path of heat/AC vents.

68000202400a.fm  Page 7  Wednesday, August 12, 2009  6:17 PM