Справочник Пользователя для ONKYO TX-SR501E

19

With 

 (Remote Interactive) you can control your 

-

compatible Onkyo CD player, DVD player, or cassette 
recorder with the TX-SR501/TX-SR501E’s remote control-
ler, and use the following special 

 functions:

■ Auto Power On

When you turn on an AV component connected via 

 while 

the TX-SR501/TX-SR501E is in Standby, the TX-SR501/
TX-SR501E automatically turns on and selects that AV com-
ponent as the input source.

This function will not work if the AV component’s power 
cord is connected to the TX-SR501/TX-SR501E’s AC OUT-
LET, or if the TX-SR501/TX-SR501E is already on.

■ Auto Source Select

When you press the play button on an AV component con-
nected via 

, the TX-SR501/TX-SR501E automatically 

selects that AV component as the input source.

■ Auto Power Off

When you set the TX-SR501/TX-SR501E to Standby, all AV 
components connected via 

 also enter Standby.

See page 40 for information on using the remote controller to 
control the other functions of your 

-compatible AV com-

ponents.

To use 

, you need to connect the TX-SR501/TX-SR501E’s 

 connector to the 

 connector on the other AV component 

with an 

 cable. An 

 cable is supplied with each 

-compatible CD player, DVD player, and cassette recorder.

Notes:
• Push the plugs in all the way to make a good connection.

• Use only 

 cables for 

 connections.

• If an AV component has two 

 connectors, you can con-

nect either one to the TX-SR501/TX-SR501E. The other 
connector is for connecting additional 

-compatible 

components.

• Connect the TX-SR501/TX-SR501E’s 

 connector to 

only Onkyo AV components. Connecting to other manu-
facturer’s AV components may cause them to malfunction.

• Some Onkyo 

-compatible AV components may not 

support the special functions described above.