Справочник Пользователя для Motorola SM56

Speakerphone Modem 

 

• Telephone answering 
machine (TAM) 

• Caller ID 

• Distinctive ring 

• Full-duplex speakerphone 

 
 
You can check which modem you have by selecting Start->Settings ->Control Panel, and then 
double click on the Modems  icon. The modem name will appear in the Modem Properties window. 

 
To ensure problem-free installation ensure that an unused COM port is available. The SM56 install 
program interrogates lower COM ports (below COM 5) and installs the modem on the first 
available and unused port. Although the SM56 functions perfectly on any available COM port, 
some communications applications may not be able to use the modem if it gets installed above 
COM 4. Refer to the Troubleshooting section in this document for information on how to force the 
modem onto a COM port below COM 5 after install is complete.  
 

1. Power down the computer.   
2. Locate the connector (AC-Link, CNR, PCI. Mini PCI, etc.) on the motherboard, and carefully 
insert the SM56 modem board. 
3. Connect the Wall jack on the modem board to an analog phone jack using an RJ-11 phone cable. 

If your modem board also has a telephone handset jack, make sure to not plug the telephone 
line into that jack. The jacks will be labeled with a little icon and/or text indicating which is 
which. 

4. Power ON the computer. 
 
Important: When using the SM56 modem, or any modem for that matter, you should always 
connect the modem line input to a direct analog telephone line. This will maximize modem 
performance by avoiding any problems introduced by internal PBX systems, etc.  
 

(Note : The Install Wizard may vary slightly with different versions of the OS and different service 
packs) 
 
On starting Windows for the first time after installing the modem Plug and Play (PnP) detects the 
new hardware and begins an install wizard for the modem. The modem is detected as a new PCI