Справочник Пользователя для Garmin gns 500w

127

190-00356-00 Rev E

Airport Arrivals

4.    Press ENT. The cursor moves to the transitions 

(TRANS) field. 

5.   Turn the small right knob to display a window 

of available transitions. Continue turning the 
small right knob to select the desired transi-
tion. 

6.   Press ENT. The cursor moves to the runway 

field. 

7.  Turn the small right knob to display a window 

of  available  runways.  Continue  turning  the 
small right knob to select the desired runway. 
(“ALL” may appear in the runway field, indicat-
ing the arrival procedure applies to all runways. 
For  airports  with  parallel  runways, “B”  may 
appear at the end of the runway designation 
to indicate the arrival procedure applies to both 
runways.) 

8.  Press ENT. To remove the flashing cursor, press 

the small right knob. 

The following options are available for the airport 

arrival page, by pressing the MENU key: 

Load into Active FPL?
As described earlier in this section. 
 Select Next FPL Apt?
As described earlier in this section. 

Select Destination Apt?
As described earlier in this section. 

The airport departure page shows the available Air-

port Standard Instrument Departure (SID) procedures 
for the selected airport. Where multiple runways or 
transitions are associated with the departure proce-
dure, that information may also be displayed. A map 
image provides a layout diagram for each departure, 
runway and transition. 

1.   Press  the  small  right  knob  to  activate  the 

cursor.