Справочник Пользователя для Garmin gns 500w

177

190-00356-00 Rev E

Setup 2

4.   Turn  the  large  right  knob  to  highlight  the 

right (decimal) part of the frequency field. 

5.   Turn the small right knob to enter the desired 

frequency. 

6.   Repeat for any remaining desired frequencies, 

then press the small right knob to finish. 

When the remote Com frequency recall switch is 

pressed, the next preset frequency will be moved into 
the Com Standby frequency box and a small window 
with the current Com Frequency Preset number will 
appear next to it. You can scroll down through the preset 
frequencies by repeatedly pressing the remote Com Fre-
quency recall switch. Empty Preset slots are skipped. 

1.   Select “Display” from the Setup 2 page. 

2.   The  flashing  cursor  highlights  the  backlight 

mode field. Turn the small right knob to select 
the desired mode: Auto or Manual. Press ENT 
to accept the selection. 

3.   If “Manual”  is  selected,  the  flashing  cursor 

moves  to  the  backlight  level  field. Turn  the 
small right knob to select the desired level. 
Press ENT to accept the selection. 

Contrast setting is adjustable in either Auto or 

Manual Mode. Auto mode is the preferred setting. The 
contrast value edited in Auto Mode is not the actual 
contrast, but an offset that is applied to the automatic 
value generated by the formula based on unit tempera-
ture. 

1.   Select “Display” from the Setup 2 page. 
2.   Turn  the  large  right  knob  to  highlight  the 

contrast mode field. 

3.   Turn the small right knob to select the desired 

mode: Auto or Manual. Press ENT to accept 
the selection. 

4.   The flashing cursor moves to the contrast level 

field. Turn the small right knob to select the 
desired level. Press ENT to accept the selec-
tion.