Справочник Пользователя для Garmin gns 500w

17

190-00356-00 Rev E

IFR Procedures

Once the direct-to or flight plan is confirmed, the 

whole range of instrument procedures is available to 
you. Departures (SIDs), arrivals (STARs), non-preci-
sion and precision approaches are stored within the 
NavData card and available using the PROC (proce-
dures) key. 

The steps required to select and activate an 

approach, departure or arrival are identical. In this 
introductory section, we’ll show examples of the steps 
required to select an approach, but keep in mind the 
same process also applies to departures and arrivals. 

1.   Turn the small right knob to select the desired 

option (“Select Approach?”, “Select Arrival?” 
or “Select Departure?”) from the procedures 
page. 

2.   Press ENT to display a list of available proce-

dures for the arrival (when using approaches 
or  STARs)  or  departure  (when  using  SIDs) 
airport. 

3.   Turn the small right knob to select the desired 

procedure and press ENT. 

4.   For approaches, a window appears to select the 

desired initial approach fix (IAF) or provide a 
“vectors” option to select just the final course 
segment of the approach. Turn the small right 
knob to select the desired option and press 
ENT. Vectors guidance is relative to the final 
inbound course. A line is drawn beyond the 
final approach fix, allowing you to intercept 
the  final  course  segment  beyond  its  normal 
limits. 

5.   For departures and arrivals, a window appears 

to select the desired transition. Turn the small 
right knob to select the desired option and 
press ENT. 

6.  With “Load?” highlighted, press ENT to add 

the procedure to the flight plan or direct-to. 

In your flight plan or direct-to, the departure 

or arrival airport is replaced with the sequence of 
waypoints contained within the selected procedure.