Справочник Пользователя для Garmin gns 500w
2 - NAV PAGES
40
190-00356-00 Rev E
Data Fields on the Map
The “Data Fields Off?” option provides a full-screen
map display (shown bottom right), without the four
data fields along the right-hand side of the screen.
Select this option when you wish to display a larger
map area. If this option has been selected and the
data fields are off, “Data Fields On?” will appear as an
option instead.
data fields along the right-hand side of the screen.
Select this option when you wish to display a larger
map area. If this option has been selected and the
data fields are off, “Data Fields On?” will appear as an
option instead.
To turn the data fields on or off, press MENU and
turn the large right knob to highlight “Data Fields
Off?” (or “Data Fields On?”), then press ENT.
turn the large right knob to highlight “Data Fields
Off?” (or “Data Fields On?”), then press ENT.
Selecting Desired On-Screen Data
“Change Fields?” allows you to choose the data
displayed on the four user-selectable data fields along
the right-hand side of the map page. There are twelve
available data types, including bearing to destina-
tion, distance to destination, estimated time of arrival,
ground speed, minimum safe altitude and track. See
Section 11 for descriptions of these (and other) naviga-
tion terms.
the right-hand side of the map page. There are twelve
available data types, including bearing to destina-
tion, distance to destination, estimated time of arrival,
ground speed, minimum safe altitude and track. See
Section 11 for descriptions of these (and other) naviga-
tion terms.
To change a data field:
1. Press MENU on the Map page and then turn
the large right knob to highlight “Change
Fields?”. Then, press ENT.
Fields?”. Then, press ENT.
2. Turn the large right knob to highlight the
data field you wish to change.
3. Turn the small right knob to select the type
of data you want to appear on this field and
press ENT.
press ENT.
4. Press the small right knob to remove the
cursor.
NOTE: The on-screen traffic information will oc-
cupy two data fields, leaving room to display only
two additional data types. Traffic information is
only available when the 400W-series installation
includes connection to traffic information sources.
See the 400W Series Pilot’s Guide Addendum,
part number 190-00356-31.
cupy two data fields, leaving room to display only
two additional data types. Traffic information is
only available when the 400W-series installation
includes connection to traffic information sources.
See the 400W Series Pilot’s Guide Addendum,
part number 190-00356-31.
Map Page Options