Справочник Пользователя для Metra Electronics 95-2009

Unsnap the top edge of the knee 
bolster panel.

Disconnect the negative battery 
terminal to prevent an accidental
short circuit.

Remove the plastic trim piece to the
left of the glove box and (1) Phillips
screw exposed. 

Remove (1) Phillips screw from the
panel.  

Remove the ashtray cluster and (2)
Phillips screws from each side.  

Unclip the entire dash trim bezel and
remove. 

Open doors and unsnap end caps
from each side of dash. 

Unsnap and remove radio/instrument
cluster panel.

Remove (3) screws in order to remove
radio.

Continue to kit assembly.