Справочник Пользователя для Lucent Technologies P333T
Chapter 5
Cajun Campus CLI (Command Line Interface)
Cajun P333T User’s Guide
33
User Level Commands
Super command
The super command is used to access the Supervisor level. In this level, additional
commands are available. The (super) prompt indicates that the system is in
Supervisor level and that commands can be entered.
commands are available. The (super) prompt indicates that the system is in
Supervisor level and that commands can be entered.
The syntax for this command is:
super
Example
Console> super
Enter password: super
Console (super)#
Enable Command
The enable command is used to activate Privileged level. In the Privileged level,
additional commands are available, and certain commands display additional
information. The (enable) in the prompt indicates that the system is in Privileged
level and that commands can be entered.
additional commands are available, and certain commands display additional
information. The (enable) in the prompt indicates that the system is in Privileged
level and that commands can be entered.
The syntax for this command is:
enable
Example:
Console> enable
Enter password: enable
Console> (enable)
Show commands
Show time command
Use the show time command to display the current stack time.
The syntax for this command is:
show time
Show timeout command
Use the show timeout command to display the amount of time the CLI can remain
idle before timing out. If the result is 0, there is no timeout limit.
idle before timing out. If the result is 0, there is no timeout limit.
The syntax for this command is:
show timeout
Show timezone command
Use the show timezone command to display the current stack timezone.
The syntax for this command is:
show timezone
Show ip route command
Use the show ip route command to display IP routing table entries.