Справочник Пользователя для Metra Electronics 95-8904b

Locate the factory wiring harness 
in the dash.  Metra recommends 
using the proper mating adapters 
from Metra and AXXESS to inte-
grate your new radio.  Re-connect 
the negative battery terminal and 
test the unit for proper operation.

Attach the Double DIN brackets to 
the Double DIN trim plate.   (Fig. A)

Slide the Double DIN head unit or 
stacked ISO head units into the 
bracket/radio housing assembly 
and secure the Double DIN head 
unit or stacked ISO head units to 
the assembly using the screws 
supplied with the radio.  (Fig. B)

Using an air saw, hacksaw, or simi-
lar cutting tool, cut to the inside of 
the radio’s lower mounting holes, 
through the plastic and metal 
bracket.  (Cut on the inside of each 
hole as close to the hole as you 
can get. If cut properly you may re-
use two bottom factory screws, if 
not use self tapping screws on the 
bottom.)  (Fig. C)

Reassemble dash in reverse order 
of disassembly.