Справочник Пользователя для Metra Electronics 99-9009
99-9009
4
FINAL
ASSEMBL
Y
1
Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter and making the
connections as shown. (Isolate and indi-
vidually tape off the ends of any unused
wires to prevent electrical short circuit)
dash. Metra recommends using the
proper mating adapter and making the
connections as shown. (Isolate and indi-
vidually tape off the ends of any unused
wires to prevent electrical short circuit)
2
Re-connect the negative battery terminal
and test the unit for proper operation.
and test the unit for proper operation.
3
Reassemble radio and dash assemblies in
reverse order of disassembly.
reverse order of disassembly.
A
A)
Strip wire ends back 1/2"
B)
Twist ends together
C)
Solder
D)
Tape
B
C
D