Справочник Пользователя для Metra Electronics 99-6510

Locate the factory wiring harness in the dash. Metra recommends using the 
proper mating adapter and making connections as shown. 
(Isolate and individually tape off the ends of any unused wires to prevent 
electrical short circuit.)

Re-connect the negative battery terminal and test the unit for proper operation.

Reassemble radio and dash assemblies in reverse order of disassembly.

Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra

recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individuallytape off ends of any 

unused wires to prevent electrical short circuit.

12V Ignition / Acc . . . Red

12V Batt / Memory . . Yellow

Ground . . . . . . . . . . . Black*

Power Antenna . . . . . Blue

Amp Turn-On . . . . . . Blue / White

Amp Ground . . . . . . . Black / White

Illumination. . . . . . . . Orange

Dimmer . . . . . . . . . . Orange / White

Right Front (+) . . . . . White

Left Front (-) . . . . . . . White / Black

Right Rear (+). . . . . . Violet

Right Rear (-) . . . . . . Violet / Black

Left Rear (+). . . . . . . Green

Left Rear (-) . . . . . . . Green / Black

*NOTE: When Black a wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to
manufacturer’s specifications.

1-800-221-0932       www.metraonline.com