Справочник Пользователя для Hoyt recurve-2005
cult to remove limbs after shooting. A dowel which is not rolled
far enough may fail to allow the detent on the limb dovetail to
positively click into the dowel, complicating the stringing
process.
far enough may fail to allow the detent on the limb dovetail to
positively click into the dowel, complicating the stringing
process.
Remember that dowels are asymmetrical, and need to be
installed from the sight window side of the bow only.
installed from the sight window side of the bow only.
If the pocket needs some adjusting, first string the bow (riser and
limbs only). Check the limb alignment of both the top and bot-
tom limbs by viewing down the bowstring from end to end on
the face of the bow. While looking down the string line, check
the location of the tip you are holding to the face of the limb in
your hand. The limb tip should be reasonably close to the cen-
ter of the limb.
limbs only). Check the limb alignment of both the top and bot-
tom limbs by viewing down the bowstring from end to end on
the face of the bow. While looking down the string line, check
the location of the tip you are holding to the face of the limb in
your hand. The limb tip should be reasonably close to the cen-
ter of the limb.
Adjusting the Pocket
The Matrix and A e r o Tec limb pocket design is the most
advanced pocket alignment adjustment system available today.
This limb alignment system maintains its settings in all condi-
tions. You can adjust your limb alignment to make it perfectly
compatible to the riser simply by removing or adding the sup-
plied washers to the alignment dowel.
The Matrix and A e r o Tec limb pocket design is the most
advanced pocket alignment adjustment system available today.
This limb alignment system maintains its settings in all condi-
tions. You can adjust your limb alignment to make it perfectly
compatible to the riser simply by removing or adding the sup-
plied washers to the alignment dowel.
To adjust your pocket follow these directions:
1. Refer to the diagram below and note the condition.
1. Refer to the diagram below and note the condition.
Condition A
Need to adjust
limb tip to the
right.
Condition B
Need to adjust
limb tip to the
left.
9