Справочник Пользователя для Metra Electronics 99-7867

D

isconnect the negative battery ter-

minal to prevent an accidental short
circuit.

Unclip the power outlet panel and
remove (2) Phillips screws exposed
facing up. (“A” in Figure A)

Unclip the radio trim panel assembly
(including the head unit and the haz-
ard switch) then unplug and remove
the assembly. (Figure A)

Remove (4) Phillips screws securing
the factory head unit to the bracket
assembly and remove the unit.
(“B” in Figure A)

"C"

"C"

"C"

"C"

"D"

"D"

If a factory pocket is present,
remove (4) Phillips screws securing
the pocket to the bracket assembly
and remove.

Remove (4) Phillips screws securing
the bracket assembly to the back of
the radio trim bezel and remove the
bezel. (Retain the bracket assembly
and screws to be reinstalled into the
double DIN trim plate during kit
assembly). (“C” in Figure B)

Remove (2) Phillips screws securing
the hazard switch to the back of the
radio trim panel and remove the
switch. (Retain the switch and screws
to be reinstalled into the double DIN
trim plate during kit assembly). 
(“D” in Figure C)