Справочник Пользователя для Metra Electronics 99-6506
99-6506
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
terminal to prevent an accidental
short circuit.
1
Loosen (1) T-15 Torx screw from the
front side of shift knob and pull up to
remove. (Figure A)
NOTE: For models equipped with no
release lever on shift knob just turn
counter-clockwise to remove.
front side of shift knob and pull up to
remove. (Figure A)
NOTE: For models equipped with no
release lever on shift knob just turn
counter-clockwise to remove.
2
CHRYSLER PACIFICA 2004-2008
Unsnap floor console trim around the
shifter. Unplug harness to console
trim and remove trim. (Figure B)
shifter. Unplug harness to console
trim and remove trim. (Figure B)
3
Unsnap and remove ignition key
trimring.
trimring.
4
Unsnap and remove the dash trim
panels from each side of the Radio/
Climate Controls. (Figure C)
panels from each side of the Radio/
Climate Controls. (Figure C)
5
Remove (4) Phillips screws to
remove radio.
remove radio.
Note: When DIN mounting a radio a
piece of plastic in the dash cavity
may have to be removed for radio
depth clearance (Figure D).
piece of plastic in the dash cavity
may have to be removed for radio
depth clearance (Figure D).
6
DASH DISASSEMBLY
P
R
N
D
AUTOSTICK
A
P
R
N
D
AUTOSTICK
B
C
POWER
OUTLET
POWER
OUTLET
D