Справочник Пользователя для Insignia NS-DPF3G

 

Picture format 

JPG/JPEG        

 

Panel size 

3.5 inch (89 mm)

 

Memory card formats 

SD, SDHC, MMC

 

Power source 

USB 5V

 Power 

consumption 

< 

2W

 Operating 

temperature 

41~95°F 

(5~35°C)

 

Weight 

0.20 lb. (0.09 kg)

 

Dimensions (W × H × D) 

3.7 × 3.0 × 0.5 inches 

 

 

(95 × 77 × 13 mm)

 Built-in 

battery 

Li-polymer

•  Make sure that the memory card is one of the supported formats, and that it is 
 inserted 

correctly.

•  Make sure that the pictures are JPEG format.
•  If picture loading is slow, reduce the size of your pictures on a computer before 
  viewing them on the frame.
•  Some issues may be resolved by turning the frame off and then on again. In 
  extreme cases, you may need to insert a straightened paperclip into the RESET 
  hole on the back of frame.

1  Read these instructions.
2 Keep these instructions.
3  Heed all warnings.
4  Follow all instructions.
5  Do not use this device near water.
6  Clean only with dry cloth.
7  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8  Do not install near any heat sources such as radiators, heat registers, stoves, or other devices 
  (including amplifiers) that produce heat.
9  Protect the power cord from being walked on or pinched particularly at plugs, convenience 
  receptacles, and the point where they exit from the device.
10 Only use attachments/accessories specified by the manufacturer.
11 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or 
  sold with the device . When a cart is used, use caution when moving the cart/device  
  combination to avoid injury from tip-over.
12 Unplug this device during lightning storms or when unused for long periods of time.
13 Refer all servicing to qualified service personnel. Servicing is required when the device has 
  been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 
  spilled or objects have fallen into the device, the device has been exposed to rain or 
  moisture, does not operate normally, or has been dropped.
14 To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, 
  dripping, or splashing, and no objects filled with liquids, such as vases, shall be placed on it.

© 2009 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy 
Enterprise Services, Inc. Registered in some countries. All other products and brand names are 
trademarks of their respective owners.

ENGLISH 09-0401

A number of different functions can be accessed using your frame’s pop-up menu. To 
access the pop-up menu, press        during a slideshow or while browsing single pictures.  
If a slideshow is playing, it will be paused while the pop-up menu is displayed.
Note: The pop-up menu cannot be accessed while viewing thumbnails.
1 Press 

 or  to select functions in the pop-up menu. Press         to confirm a selection.

2  Press      to hide the pop-up menu and return to Slideshow or Browse mode.  
  Selecting         in the pop-up menu will also hide the pop-up menu and 
 return 

you 

to 

Slideshow or Browse mode.

Rotating, zooming, and panning pictures
1  Highlight the picture you want to rotate, zoom, or pan in Browse or Slideshow mode.
  (You cannot access the menu while in Thumbnail mode.)
2  Press        to access the menu. 
3  To rotate a picture, press 

 or  to select        , then press        to rotate the picture 

  90 degrees. Or, to zoom and pan a picture, press 

 or  to select        , then press        to 

  zoom the picture. While a picture is zoomed, you can pan the image by highlighting one
  of the        ,        ,        ,        buttons, then pressing       .
4  Press      to exit the menu.

To copy pictures from a memory card:
1  Insert a memory card containing pictures into the frame’s memory card slot. 
  A slideshow of pictures on the card plays automatically.
2  Select the picture you want to copy in Browse or Slideshow mode.
3  Press        to open the pop-up menu. 
4  Press 

 or  to select the         icon. A menu appears on the screen.

  • To copy only the picture currently being viewed, select Copy One, press
  

 to 

select 

Yes, then press        again.  

  • To copy all pictures on the memory card, select Copy All, press        to select Yes,
     then press        again.
 Note: Pictures cannot be copied from the frame’s internal memory to a memory card 
  using the frame alone.  

To delete pictures:
1  Select the picture you want to delete in Browse or Slideshow mode.
2  Press        to open the pop-up menu. 
3 Press 

 or  to select the        icon. A menu appears on the screen.

  • To delete only the picture currently being viewed, select Delete One, press 
  

 to 

select 

Yes, then press        again.

  • To delete all pictures in the frame’s internal memory, select Delete All, press 
  

 to 

select 

Yes, then press        again.

To browse pictures from Slideshow mode:
1 While in Slideshow mode, press        to open the pop-up menu. The slideshow pauses.
2 Press 

 or  to select         or        .

3  Select         to view the previous picture in the slideshow, or select         to view the 
 next 

picture.

To browse pictures from Browse mode:
1 Press 

 or  to select        .

2  Press        . The icon changes from         to        .  
  • Press       to hide the pop-up menu and enter Browse mode. You may now view 
    pictures one at a time.
To return to Slideshow mode, press        to display the pop-up menu.
3 Press 

 or  to select        , then press         .         changes back to        .

4  Press      to hide the pop-up menu and enter Slideshow mode.

1 From the Main menu, press 

 and  to highlight the Settings menu icon           , 

  then press        to enter the Settings menu.  
2 Press 

 and  to highlight either System Setup or Photo Setup, then 

  press        to enter the menu.
3 Press 

 and  to highlight a setting, then press        to enter the setting. 

4 Press 

 and  to change the setting, then press      to confirm your selection.

  Tip: Press       to return to the previous menu screen.
The settings in the System Setup menu allow you to control the frame’s system-wide settings:
•  Language: Sets the language used for on-screen menus and displays. Available 
 settings 

are 

English, French, and Spanish.

•  Brightness: Sets the brightness of the LCD screen.
•  Auto-Power Off: Sets the amount of time that must pass after a button is pressed 
  before the frame automatically shuts off. Available settings are Off, 30 minutes, 
  1 hour, 2 hours, 4 hours, and 8 hours.  
•  Reset Default: Resets the frame to factory default settings.
•  Version: Displays the frame’s current firmware version.
The settings in the Photo Setup menu allow you to control the frame’s settings for 
viewing pictures:
•  Display Mode: Available settings are Slideshow, Browse Mode, and Thumbnail. This 
  setting controls what your frame does when you select a memory device from the Main menu.   
 • 

Slideshow: A slideshow of pictures contained in the selected memory device 

 automatically 

begins.

 • 

Browse Mode: The first picture contained in the selected memory device is 

    automatically displayed. Press 

 or  to scroll through the pictures.

 • 

Thumbnail: Thumbnails of the pictures contained in the selected memory device 

    are displayed. Press 

 or  to highlight the picture you want to view, then press

           to display the picture.
•  Slideshow Time: Sets the amount of time between picture transitions in a slideshow 
 5 

seconds, 10 seconds, 30 seconds, 60 seconds, 60 minutes, and 24 hours. 

•  Slideshow Effect: Sets the special effect to be used for slideshow picture transitions. 
 Available 

settings 

are 

Partition, Erase, Blinds, Random lines, Grid, Cross, Spiral, 

 Rect, Close, Random, and Snake.