Справочник Пользователя для Metra Electronics 95-7323

5

Kit Assembly 95-7323

1. Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

2. Snap the Double DIN brackets to the

inside edge of the Double DIN trim

plate. (Figure A)

3. Slide the stacked ISO units into the

bracket/radio housing assembly and

secure the units to the kit using the

screws supplied with the units.

(Figure B)
4. Reassemble dash in reverse order

of disassembly.

Stacked ISO units head provision

(Figure A)

(Figure B)