Справочник Пользователя для Crestron ug sts sts-c

SmarTouch STS Touchpanels 

Crestron ST-1550 & ST-1550C

The purpose of scheduling a sequence or button is to initiate an action at a 
programmed date and time. The programmed date and time is defined as the 
activation time. It is assumed that the sequence has been developed as described in 
the previous paragraph or the preferred button initiates a function.  

A “Schedule Event” button should be available from a specialized page designed by 
the programmer. It must be touched to identify the programmable button that needs 
to be scheduled. A “scratch” schedule must also be available on a separate page so 
that the time, date, and cycle of the event can be entered. Once the “scratch” 
schedule information is assigned, it must be transferred to one of thirty possible 
scheduled events. Complete the following steps to schedule a sequence or button.  

NOTE:  The programmer of your system may have implemented a “Set Event Time 
To Current Time” button. If the activation time is close to the current time, touch this 
button to set the “scratch” schedule time and date to the current time. Then use the 
increment/decrement buttons as described in the next step to make adjustments.  

1.  Touch the “Schedule Event” button.  

2.  Touch a button that has a programmed sequence or one that initiates a 

specific function.   

3.  To set the activation time for the event, touch an “Adjust Time” button 

from the ‘scratch” schedule to open another page. Use the 
increment/decrement buttons (if supplied) to increase and decrease the 
hours, minutes, and seconds of the event.  

4.  Close the page when the activation time for the event is set.  

5.  To set the activation date for the event, touch an “Adjust Date” button 

from the ‘scratch” schedule to open another page. Use the 
increment/decrement buttons to increase and decrease the year, month, 
and day of the event.  

6.  Close the page when the activation date for the event is set.  

7.  The cycle of the event determines how often it occurs. To set the cycle 

for the event, touch a “Set Cycle” button to open another page. 
Available options for how often an event can occur are: Off (never 
occurs), Once, Daily, Weekly, Weekdays, and Weekends.  

8.  Close the page when the activation cycle for the event is set.  

9.  The event time and date have been properly set up in the “scratch” 

schedule. Open another specially design page that displays 30 possible 
schedule events. Five schedules may only be defined on the screen at 
once. To gain access to five more schedules, it may be necessary to 
touch a “More” button.  

10.  Determine the schedule that you want to use and touch that line. The 

new schedule time, date, cycle, and join number appear automatically. 
The event is now scheduled.  

•  SmarTouch STS