Справочник Пользователя для Crestron ug sts sts-c

Crestron ST-1550 & ST-1550C 

SmarTouch STS Touchpanels

appear. The Opening Screen appears when the finger is removed from 
the touchscreen.  

3.  Touch the Opening Screen and select the Calibration button from the 

Preferences and Settings Menu to enter “calibration mode”. 

To obtain the Preferences Menu, shown after this paragraph, touch the Preferences 
button from the Preferences and Settings Menu. Many options for setting parameters 
of the touchpanel are available from the Preferences Menu and are explained in the 
following paragraphs. After these parameters have been set, select the Return 
button, located at the bottom of the Preferences Menu.  

 

NOTE:  Detach the external AC power pack when viewing Battery Life Screen. If 
this pack is attached, the gauges read full charge which may be misleading.  

To obtain the Battery Life Screen, shown after this paragraph, touch the Battery Life 
button from the Preferences Menu. This screen indicates the amount of charge (or 
life) remaining in the batteries, if batteries are installed. A digital and analog gauge is 
provided. The digital gauge, located on the left side of the screen, indicates five 
levels of charge: 0%, 25%, 50%, 75%, and 100%. The illustration below shows that 
the battery life is at the 0% level. The analog gauge, located on the right side of the 
screen, indicates smaller and continuous incremental levels of charge. The analog bar 
fills to the appropriate level of charge. Touch the Return button to display the 
Preferences Menu.  

 

•  5