Справочник Пользователя для GoVideo dv2150

Specifi es whether the DVD+VCR is 
connected to an antenna or cable TV 
source.

Press VCR, then press SETUP.

Select Channel Set > Signal Type.

Choose from the following:
Antenna - Select if the DVD+VCR is 
connected to an antenna.
Cable - Select if the DVD+VCR is con-
nected to a cable TV source.

When fi nished, press SETUP to exit.

Allows you to specify the channel or 
input the DVD+VCR uses to view an 
external cable box or satellite receiver.

Press VCR, then press SETUP.

Select Channel Set > Cable Box Setup.

Set the cable box channel/input:
•  Use  to select the cable box 

output channel (usually 3 or 4).

•  Use the TV VIEW button on the re-

mote to select the Video 1 (rear) or 
Video 2 (front) input.

When fi nished, press SETUP to exit.

Sets the RF Output Channel (the chan-
nel you set on your TV to view the 
DVD+VCR). 

Press VCR, then press SETUP.

Select Channel Set > RF Output.

Set the RF Output Channel to 3 or 4.

Set your TV to the channel you se-
lected in step 3.

When fi nished, press SETUP to exit.