Справочник Пользователя для Integra dps-6.5
14
Front & Rear Panels
—Continued
A
AUDIO OUTPUT [20–21]
These jacks output analog audio. The FRONT/
D.MIX jacks can be connected to the stereo input on
a TV, hi-fi amp, or other component. The 1 and 2
jacks output the same signals so you can use either.
DVDs with 5.1-channel audio are downmixed into
two channels before being output by the FRONT/
D.MIX jacks.
If you’re using an AV receiver or surround decoder
with a 5.1-channel analog audio input, use the
FRONT/D.MIX 1 or 2 jacks and the SURR L/R,
CENTER, and SUBWOOFER jacks. In this case,
you must set the Audio Output Mode on the Initial
Setup menu to 5.1 Channel. With this setting, the
FRONT/D.MIX jacks will output the front signals,
and the SURR L/R, CENTER, and SUBWOOFER
jacks will output the surround, center, and sub-
woofer signals respectively.
D.MIX jacks can be connected to the stereo input on
a TV, hi-fi amp, or other component. The 1 and 2
jacks output the same signals so you can use either.
DVDs with 5.1-channel audio are downmixed into
two channels before being output by the FRONT/
D.MIX jacks.
If you’re using an AV receiver or surround decoder
with a 5.1-channel analog audio input, use the
FRONT/D.MIX 1 or 2 jacks and the SURR L/R,
CENTER, and SUBWOOFER jacks. In this case,
you must set the Audio Output Mode on the Initial
Setup menu to 5.1 Channel. With this setting, the
FRONT/D.MIX jacks will output the front signals,
and the SURR L/R, CENTER, and SUBWOOFER
jacks will output the surround, center, and sub-
woofer signals respectively.
B
COAXIAL DIGITAL AUDIO OUTPUT [20]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C
OPTICAL DIGITAL AUDIO OUTPUT [20]
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
D
COMPONENT 2 VIDEO OUTPUT [19]
These BNC connectors can be used to connect a TV
or projector with BNC component video inputs.
or projector with BNC component video inputs.
E
COMPONENT 1 VIDEO OUTPUT [19]
These RCA connectors can be used to connect a TV,
projector or AV receiver with component video
inputs.
projector or AV receiver with component video
inputs.
F
VIDEO OUTPUT [18]
These RCA connectors can be used to connect TVs,
projectors or AV receivers with composite video
inputs.
projectors or AV receivers with composite video
inputs.
G
S VIDEO OUTPUT [18]
These connectors can be used to connect TVs or
projectors with S Video inputs.
projectors with S Video inputs.
H
jacks [21]
These
(Remote Interactive) connectors can be
connected to the
connectors on your other Inte-
gra AV components for interactive control.
For remote control operation, you must make an
analog RCA connection between your DPS-6.5 and
the other AV component, even if they are connected
digitally.
For remote control operation, you must make an
analog RCA connection between your DPS-6.5 and
the other AV component, even if they are connected
digitally.
I
IR IN/OUT [22]
The IR IN connector can be used to connect a com-
mercially available IR receiver, which can be used
to pickup signals from the remote controller when
the DPS-6.5 is located in another room, installed in
a rack, or is out of range of the remote controller
The IR OUT connector can be used to connect a
commercially available IR emitter, which can be
used to pass remote controller signals received by
the IR IN along to other AV components.
mercially available IR receiver, which can be used
to pickup signals from the remote controller when
the DPS-6.5 is located in another room, installed in
a rack, or is out of range of the remote controller
The IR OUT connector can be used to connect a
commercially available IR emitter, which can be
used to pass remote controller signals received by
the IR IN along to other AV components.
J
RS 232
This RS-232 port can be connected to an external
controller.
controller.
K
AC INLET [23]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
other of the power cord should be connected to a
suitable wall outlet.
Rear Panel
R
L
SURR
CENTER
1
2
FRONT/D. MIX
AUDIO OUTPUT
DIGITAL
SUB
WOOFER
OPTICAL
COAXIAL
VIDEO OUTPUT
RS232
VIDEO
S VIDEO
P
B
Y
P
R
P
B
Y
P
R
COMPONENT 2
COMPONENT 1
REMOTE
CONTROL
IR
AC INLET
OUT
IN
MODEL NO.
DPS-
6.5
RATING:
AC 120 V 60Hz 11 W
AC 120 V 60Hz 11 W
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
8 9
J
6 7
4
5
K
3
2
1
DPS-6.5.book Page 14 Thursday, August 5, 2004 3:27 PM