Справочник Пользователя для Integra dps-6.5

 

49

 

If you’ve selected DTS > PCM in DTS Out on page 43 
or 2 Channel in Audio Output Mode below section, you 
can choose the way the signal is downmixed to PCM 
audio. Stereo will downmix the DTS signal to 2-channel 
stereo, whereas Lt/Rt will downmix to a 2-channel signal 
compatible with Dolby surround matrix decoders. (This 
allows you to hear surround sound if your AV receiver or 
amplifier has Dolby Pro Logic capability.)

 

If you connected this player to your amplifier using the 
5.1 channel analog outputs (front, surround, center and 
subwoofer outs), set this to 5.1 Channel; if you con-
nected only the stereo outs, set to 2 Channel.

 

• Even if you set Audio Output Mode to 5.1 Channel, 

you’ll only get sound from all speakers when playing 
a 5.1 channel multichannel disc.

• When set to 5.1 Channel, only the front left/right 

channels are output from the AUDIO OUT (2ch) 
jacks. Change to 2 Channel if you want to listen to 
downmixed stereo audio (for example, because you 
are listening through the TV’s built-in speakers).

• When set to 5.1 Channel there is no digital output 

when playing DVD-Audio.

• If you set to 2 Channel, Dolby Digital, DTS and 

MPEG audio is mixed down to two channels so you 
still hear all the audio recorded on the disc. With DTS 
encoded audio, you can choose how the signal is 
downmixed to PCM audio. See DTS Downmix above 
to change the downmix setting.

• Some DVD-Audio discs don’t allow downmixing of 

audio. These discs always output multi-channel audio 
regardless of the setting made here.

 

You only need to make this setting if you connected this 
player to your amplifier using the 5.1 channel analog 
outputs.
This setting does not affect digital audio output.

Use the Speaker Installation screen to tell the player 
what kinds of speakers you have connected.

 

• The L and R, and RS and LS speakers 

are paired; you can’t set them differ-
ently.

 

• You can see the effect of your changes 

in the room graphic on the right of the 
screen.

• Except for the subwoofer, you can set 

speaker size to Large or Small. If the 
main speaker cone in the speaker is 
12cm or more, set to Large, otherwise 
set to Small (or Off if you don’t have 
that speaker).

• If you set the front L and R speakers to 

Small, the center and surround speak-
ers are automatically set to Small and 
the subwoofer to On.

• The subwoofer can only be set to On or 

Off.

Enter

Enter

DPS-6.5.book Page 49 Thursday, August 5, 2004 3:27 PM