Справочник Пользователя для Indesit pwe 9168 s

As the colours of the wires in the lead may not 
correspond with the coloured markings identifyng the 
terminals in your plug, proceed as follows:
Connect Green & Yellow wire to terminal marked 

E or    

or coloured Green or Green & Yellow.
Connect Brown wire to terminal marked 

L or coloured 

Red.
Connect Blue wire to terminal marked 

N or coloured 

Black.
If a 13 amp plug (BS 1363) is used it must be fitted with a 
13 amp fuse, either in the plug or adaptor or at the 
distribution board.
If you are in any doubt about the electrical supply to your 
machine, consult a qualified electrician before use.
How to connect an alternative plug:
The wires in this mains lead are coloured in accordance 
with the following code:
BLUE   

Disposing of the appliance:
When disposing of the appliance please remove the plug 
by cutting the mains cable as close as possible to the 
plug body and dispose of it as described above.
 

!

 The washing machine should not be installed in 

an outdoor environment, not even when the area is 
sheltered, because it may be very dangerous to leave it 
exposed to rain and thunderstorms.

!

 When the washing machine is installed, the mains 

socket must be within easy reach. 

!

 Do not use extensions or multiple sockets.

!

 The  power supply cable must never be bent or 

dangerously compressed.

!

 The power supply cable must only be replaced by an 

authorised serviceman.

Warning! The company denies all liability if and when 
these norms are not respected.

Once the appliance has been installed, and before you use 
it for the first time, run a wash cycle with detergent and no 
laundry, setting the 90°C programme without a pre-wash 
cycle.