Справочник Пользователя для Meyer Sound 600-HP
The 600-HP is a self-powered, high-output
subwoofer that may be used in both flown and
ground-stacked configurations. It is available
in three versions: as a portable version with
handles, for installation without handles, or
with rigging hardware. When fitted with the
optional QuickFly MRF-600 rigging frame, the
600-HP is designed to rig directly with the
MICA compact, high-power curvilinear array
loudspeakers. The versatility of the 600-HP
also allows it to be used with a variety of other
Meyer Sound self-powered loudspeakers —
including the CQ-1, CQ-2, UPA-1P, UPA-2P and
UPJ-1P — in fixed and touring applications.
subwoofer that may be used in both flown and
ground-stacked configurations. It is available
in three versions: as a portable version with
handles, for installation without handles, or
with rigging hardware. When fitted with the
optional QuickFly MRF-600 rigging frame, the
600-HP is designed to rig directly with the
MICA compact, high-power curvilinear array
loudspeakers. The versatility of the 600-HP
also allows it to be used with a variety of other
Meyer Sound self-powered loudspeakers —
including the CQ-1, CQ-2, UPA-1P, UPA-2P and
UPJ-1P — in fixed and touring applications.
The system features two specially designed
high-power 15-inch cone drivers, engineered
to provide optimal performance in subwoofer
applications. The high-excursion, back-vented
drivers have 4-inch voice coils, and each is
rated to handle 1200 watts (AES)*.
high-power 15-inch cone drivers, engineered
to provide optimal performance in subwoofer
applications. The high-excursion, back-vented
drivers have 4-inch voice coils, and each is
rated to handle 1200 watts (AES)*.
The two cone drivers are housed in a rectangu-
lar, optimally tuned and vented enclosure that
is the same width as MICA, and a few inches
higher and deeper. The enclosure geometry
makes vertical ground-stacking easy and con-
venient. All versions include plastic skids on
lar, optimally tuned and vented enclosure that
is the same width as MICA, and a few inches
higher and deeper. The enclosure geometry
makes vertical ground-stacking easy and con-
venient. All versions include plastic skids on
DATASHEET
the bottom of the unit to prevent damage to
the enclosure or the unit below; the skids align
with slots on the cabinet’s top to ensure secure
stacking.Operating frequency range is from 36
Hz to 150 Hz, with a peak SPL at one meter of
138 dB.
the enclosure or the unit below; the skids align
with slots on the cabinet’s top to ensure secure
stacking.Operating frequency range is from 36
Hz to 150 Hz, with a peak SPL at one meter of
138 dB.
Each cone driver is driven by a channel of the
integral two-channel class AB/H amplifier with
complementary MOSFET output stages. Total
output power is 2250 watts (4500 watts peak),
providing the system with sufficient headroom
to accommodate the most extreme sound rein-
forcement demands with ease. The circuitry
includes TruPower
integral two-channel class AB/H amplifier with
complementary MOSFET output stages. Total
output power is 2250 watts (4500 watts peak),
providing the system with sufficient headroom
to accommodate the most extreme sound rein-
forcement demands with ease. The circuitry
includes TruPower
®
limiting to extend the
life of the drivers and hold long-term power
compression to less than 1 dB. The amplifier,
control electronics, and power supply are inte-
grated into a single, field-replaceable module
that is mounted into the rear of the enclosure.
compression to less than 1 dB. The amplifier,
control electronics, and power supply are inte-
grated into a single, field-replaceable module
that is mounted into the rear of the enclosure.
The optional MRF-600 rigging frame uses
captive, rigid GuideALinks contained within
recessed guides in the lower front and rear
corners of the enclosure. A slot and convenient
pinned handle allow the link to be moved and
pinned for arraying or storage. The versatility
of angles achieved by using combinations of
captive, rigid GuideALinks contained within
recessed guides in the lower front and rear
corners of the enclosure. A slot and convenient
pinned handle allow the link to be moved and
pinned for arraying or storage. The versatility
of angles achieved by using combinations of
CONCERT SERIES
41.40" w x 22.50" h x 22" d
(1052 mm x 572 mm x 559 mm)
182 lbs (82.55 kg); with rigging: 215 lbs (97.52 kg)
Premium birch plywood
Black textured
Powder-coated, hex stamped steel lined with acoustical
black mesh
Optional end-mounted QuickFly
(1052 mm x 572 mm x 559 mm)
182 lbs (82.55 kg); with rigging: 215 lbs (97.52 kg)
Premium birch plywood
Black textured
Powder-coated, hex stamped steel lined with acoustical
black mesh
Optional end-mounted QuickFly
®
rigging hardware, with
captive GuideALinks™ on the bottom four corners and
quick-release pins; compatible with MICA™ compact high-
power curvilinear array loudspeakers and accessories
quick-release pins; compatible with MICA™ compact high-
power curvilinear array loudspeakers and accessories
Dimensions
Weight
Enclosure
Finish
Protective Grille
Rigging
front and back positions allows a MICA array
suspended under 600-HP subwoofers to be
uptilted for balcony coverage up to 15 degrees,
or downtilted to 6 degrees with respect to
the 600-HP. The 600-HP can make use of the
optional MG-MICA rigging grid to accommodate
a variety of flown and stacked configurations.
suspended under 600-HP subwoofers to be
uptilted for balcony coverage up to 15 degrees,
or downtilted to 6 degrees with respect to
the 600-HP. The 600-HP can make use of the
optional MG-MICA rigging grid to accommodate
a variety of flown and stacked configurations.
The durable enclosure is constructed of pre-
mium birch plywood coated with a black, tex-
tured hard-shell finish, with a powder-coated,
hex-stamped steel grille lined with acoustical
black mesh to protect the drivers. The exterior
dimensions of the 600-HP are suitable for both
European and U.S. trucks, and it can securely
travel in stacks using the MCF-MICA caster
frame, or MDB-600 dolly board when not fitted
with rigging frames.
mium birch plywood coated with a black, tex-
tured hard-shell finish, with a powder-coated,
hex-stamped steel grille lined with acoustical
black mesh to protect the drivers. The exterior
dimensions of the 600-HP are suitable for both
European and U.S. trucks, and it can securely
travel in stacks using the MCF-MICA caster
frame, or MDB-600 dolly board when not fitted
with rigging frames.
Options for the 600-HP include weather pro-
tection and custom color finishes for fixed
installations and other applications requiring
specific cosmetics. The RMS™ remote monitor-
ing system — standard with the rigging ver-
sion and optional with other configurations
— allows comprehensive monitoring of system
parameters on a Windows
tection and custom color finishes for fixed
installations and other applications requiring
specific cosmetics. The RMS™ remote monitor-
ing system — standard with the rigging ver-
sion and optional with other configurations
— allows comprehensive monitoring of system
parameters on a Windows
®
-based network.
Efficient, high-power and high-excursion cone
drivers
Extremely low distortion for low-frequency
clarity
Very high peak power yields excellent transient
reproduction
Low-frequency complement to MICA and other
Meyer Sound self-powered loudspeakers
features & benefits
Stackable, and flyable by itself or with MICA
full-range loudspeakers
Transportable in stacks using optional
MCF-MICA caster frame
applications
Medium to large theatres and clubs
Houses of worship
Portable and installed A/V systems
600-HP :
Compact High-Power Subwoofer
600-HP shown with optional
QuickFly MRF-600 rigging frame
QuickFly MRF-600 rigging frame
43.87
[1114.37 mm]
41.40
[1051.56 mm]
22.97
[583.51 mm]
22.50
[571.44 mm]
22.00
[558.75 mm]
11.25
[285.72 mm]
15.08
[382.93 mm]
6.90
[175.22 mm]
18.46
[468.84 mm]
10.50
[266.70 mm]
12.00
[304.80 mm]
43.87
[1114.37 mm]
41.40
[1051.56 mm]
22.97
[583.51 mm]
22.50
[571.44 mm]
22.00
[558.75 mm]
11.25
[285.72 mm]
15.08
[382.93 mm]
6.90
[175.22 mm]
18.46
[468.84 mm]
10.50
[266.70 mm]
12.00
[304.80 mm]
When fitted with MRF-600 rigging frames:
*
Driven continuously for twohours with a band-limited noise signal
having a 6 dB peak-to-average ratio
.