Справочник Пользователя для GE GCG1540

Proper installation is your responsibility. Make 
sure you have everything necessary for correct
installation. It is the personal responsibility and
obligation of the customer to contact a qualified
installer to assure that electrical installation meets
national and all local codes and ordinances.

Check the location  where your compactor will be
installed. The cabinet opening should be square.
You should be able to fully open the compactor
drawer. Six inches (15.2cm) of clearance is
needed on the right side of compactor drawer to
be able to remove the compactor bag. Allow 23
inches (58.4 cm) in front of the compactor to
remove drawer.

■ Level
■ Phillips screwdriver
■ Flat-blade screwdriver

■ Pliers
■ Utility knife
■ Scissors

■ Measuring tape
■ 5/16″ box-end wrench
■ Gloves

Remove parts from literature package.

■ 2 mounting clips

■ 2 mounting screws 

#8 - 18 x 1/2

″

Grounded electrical
outlet must be 3

″

(7.6 cm) min. from
either side wall.

15-1/4

″ min.

(38.4 cm)

18

″ min.

(45.7 cm)

24

″ min.

(61 cm)

34-1/4

″ min.

(87 cm)

34-1/8

″ min.

(86.7 cm)

24

″ min.

(61 cm)

23

″ (58.4 cm)

Clearance in front 
of the compactor is
needed to fully open 
or remove the
compactor door.

6

″ (15.2 cm)

Clearance to

the nearest

vertical wall 

on the right

side of the

compactor is

needed to

remove bag.

14-15/16

″ min.

(38 cm)

10