Справочник Пользователя для Hitachi VM-H39A

ATTACHING THE OPTIONAL DC CAMERA LIGHT (VM-CP4) 

 

75

Use the DC camera light if you wish to shoot objects in dark places. 

CAUTION: The front and lamp of the DC camera light become very hot during use of the 
camera light or immediately after use. Be careful that your hand or hair does not touch 
them. 

NOTES: 
• When the DC camera light is used, the operation time of the camera/recorder becomes 
short even if a fully-charged battry pack is attached. 
• When the camera/recorder is turned on, a voltage is always generated at the installation 
terminal of the DC camera light. Never touch this terminal. 

1. Make sure that a fully charged battery pack or AC adapter/charger is attached. 
2. Check that the camera/recorder is turned off. 
3. Attach the DC camera light to the camera light shoe. 

 

4. Turn on power of the camera/recorder and then press operate button of the DC 
camera light when required. 

NOTE: Turn on the camera light only when you need it because the operation time of the 
battery pack becomes shorter when the light is on. 

5. To remove the camera light, depress the light to release the tab from the hook and 
then move the light in the direction of the arrow.