Справочник Пользователя для Brother hl-1470n network user

APPENDIX

A-5

The BRAdmin application can be used to easily re-program your Brother print
server.

1.  Start BRAdmin.
2.  Highlight the appropriate print server. Then press select the Control menu

and choose Load Firmware. You can select more than one print server by
pressing CTRL+<select> or SHIFT+<select> on each additional print server.

There are three possible ways of sending the new software version to the print server.
For whichever method you select, you must enter a password for the print server. The
default password for the print server is "access".

3.  TFTP PUT from this host

Use this method if you have TCP/IP already installed on your PC. BRAdmin will use
the TFTP protocol to send the new firmware data to the print server.

4.  TFTP GET from a server

If you have a TFTP server installed in your network (many Unix systems provide
TFTP support), you may wish to use this option. The new firmware file must be
located in the TFTP BOOT directory on your TFTP server. In this case, your PC
makes the print server read the firmware data from the assigned TFTP server. If you
do not provide the correct file name, then the upgrade will fail. You must also ensure
that the firmware file is set so that the print server can read the file. On Unix systems
you can use the chmod command to specify file attributes. For example, chmod
filename 666 allows the filename to be accessed by anyone. Also make sure that the
TFTP service is running on your Unix server.

5.  Netware GET from a server

You must have a Netware server on your network (running IPX/SPX) and you must
store the new firmware file in the SYS/Login directory of the server. In this case,
your PC makes the print server read the firmware data from the assigned Netware
server, the print server attaches to the Netware server and reads the firmware itself.