Справочник Пользователя для Olympus sp-310-sp350
E-36
Maintenance of the TTL Connector Cap
After removing the TTL connector cap from the waterproof cap, be sure
to clean and grease the O-ring.
Use the waterproof cap maintenance adapter to remove the O-ring unit
from the waterproof cap.
to clean and grease the O-ring.
Use the waterproof cap maintenance adapter to remove the O-ring unit
from the waterproof cap.
Insert the adapter by aligning its pin with
the hole on the cap.
the hole on the cap.
Turn the adapter counterclockwise to
remove the O-ring unit.
remove the O-ring unit.
After removing the O-ring attached to the
O-ring unit, clean the O-ring groove and
apply silicon grease to the O-ring. Then,
re-attach the O-ring to the O-ring unit.
O-ring unit, clean the O-ring groove and
apply silicon grease to the O-ring. Then,
re-attach the O-ring to the O-ring unit.
❈ Reverse the removal procedure to re-attach the O-ring unit to the
waterproof cap.
1
2
3
O-ring
Waterproof cap
Waterproof cap
maintenance adapter
maintenance adapter
PT_030_EN.qxd 05.10.28 6:34 PM ページE-36