Справочник Пользователя для Konica Minolta bizhub 130f um pcl 1-1-0
Installation
2
130f PCL driver
2-3
2.1.1
For Windows 98 and Windows Me users
1
Plug the USB cable to your machine and then connect it to your
computer.
computer.
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may
result in radio interference.
Be sure to use a shielded USB cable. Use of an unshielded cable may
result in radio interference.
2
Turn on your machine and computer.
3
The “Add New Hardware Wizard” will appear.
Select “Specify the location of the driver” and click [Next].
Select “Specify the location of the driver” and click [Next].
4
Select “Specify a location” and clear any other choices. Click [Browse]
to navigate your hard disk: “C:\KONICA_MINOLTA_130f_PCL”, and
then click [OK].
to navigate your hard disk: “C:\KONICA_MINOLTA_130f_PCL”, and
then click [OK].
5
Follow the instructions that appear on the screen until you can click
[Finish].
[Finish].
6
The “Add New Hardware Wizard” appears again, repeat same
procedures from step 3 to 5.
procedures from step 3 to 5.