Справочник Пользователя для ICOM ux-r9000
6-9-16 Kamihigashi, Hirano-ku, Osaka 547-0002 Japan
Count on us!
INSTALLATION (continued)
A-8333
Ι
-1EX Printed in Japan
© 1999 Icom Inc.
u
Connect 2 connectors to the LCD unit and place the
unit using the 4 screws.
unit using the 4 screws.
i
Replace the rubber spacer from the backside of the
front panel with the supplied one. Take care of the
direction.
front panel with the supplied one. Take care of the
direction.
o
Remove the 4 screws from the front panel and re-
place the CRT screen filter with the LCD screen fil-
ter as shown in the diagram below. Assemble the
front panel.
place the CRT screen filter with the LCD screen fil-
ter as shown in the diagram below. Assemble the
front panel.
!0
Adjust the contrast, color, tint and brightness using
the controls as shown below, if desired.
the controls as shown below, if desired.
!1
Replace the DISPLAY unit cover and attach the
cable clamp as shown below. Clamp the cables.
cable clamp as shown below. Clamp the cables.
!2
Replace the RF A/TV units and SW-D unit.
!3
Replace the top/bottom covers and the rack mount-
ing handles.
ing handles.
LCD unit
Rubber spacer
Front
side
side
Rear
side
side
Top
LCD screen filter
[CONTRAST]
[COLOR] [TINT]
[BRIGHT]