Справочник Пользователя для GTO pro sl-2000 dc slide gate operator
Technical Specifications
We are professional access system specialists
DC SERIES
Visit us on the web: www.gtopro.com
SL
DRIVE
• Powered by a resilient 12 volt DC motor.
• Case hardened steel gear reducer.
• Temperature rating of motor: -30° F
• Case hardened steel gear reducer.
• Temperature rating of motor: -30° F
(-34° C ) to +160° F ( 93° C).
• Opening time is 1’ per second.
• OPTIONAL: Friction disk brake
• Opening time is 1’ per second.
• OPTIONAL: Friction disk brake
designed to prevent forced entry –
models: PRO-SL1000B, PRO-SL1200B,
PRO-SL2000B and PRO-SL2200B.
POWER
• The PRO-SL1000/SL2000 systems
are powered by a 12 volt DC / 7.0
are powered by a 12 volt DC / 7.0
amp hour, sealed, rechargeable
battery.
• Battery charge maintained by a
• Battery charge maintained by a
120 V AC / 60 hertz input and 18
V AC at 40 VA (2.9 amperes) out-
put transformer rectified to 14 V
DC through the GTO Control
Board.
NOTE:
Transformer should never
be connected directly to any battery.
• OPTIONAL: GTO Solar Panel
Charger: float voltage 14.5 V DC
out put from a 19-3/8” (49.85 cm)
x 15-1/4” (38.74 cm) silicon alloy
panel. Generates minimum of 10
watts at 300 mA. A gated diode on
the control board prevents battery
discharge. FP295, 24 Amp hour
battery kit required for SL2000
solar applications.
• OPTIONAL: Concrete mounting
• OPTIONAL: Concrete mounting
pad available.
CONTROLS
• The GTO control board can be
programmed for left-to-right or right-
to-left opening.
• Adjustable auto close, obstruction
• Adjustable auto close, obstruction
sensitivity and dual gate sequencing.
• Auto-memorization of digital
• Auto-memorization of digital
transmitter code.
• Charging regulated circuit on control
• Charging regulated circuit on control
board. “Sleep draw” is 40 mA; “active
draw” is 2 to 5 amps.
• GTO remote-mounted RF receiver
• GTO remote-mounted RF receiver
tuned at 318 MHz.
• Fully compatible accessory terminal
• Fully compatible accessory terminal
block provides connections for safety
loops, wands, intercoms, card readers,
phone systems.
OPERATIONAL CAPACITY
The GTO/PRO PRO-SL1000 will handle gates weighing up to 500 lbs
(226.8 kg) and up to 30 ft. (9.1 m) in length (per leaf). The GTO/PRO
PRO-SL2000 will handle gates weighing up to 1000 lbs. (453.6 kg)
and up to 30 ft. (9.1 m) in length (per leaf).
Note: ball bearing rollers should be used on all gates.
Note: ball bearing rollers should be used on all gates.
GATE CAPACITY CHART PRO-SL1000
20 ft.
120
110
100
90
16 ft.
140
130
120
110
12 ft.
160
150
140
130
8 ft.
180
170
160
150
200 lb.
300 lb.
400 lb.
500 lb.
Gate Weight
Ga
te
Opening Length
������� ����
�� ���
���
��
���� ����
(Estimated number of cycles based on use with a transformer)
PRO-SL1000 & PRO-SL2000
GATE CAPACITY CHART PRO-SL2000
20 ft.
80
70
60
50
16 ft.
100
90
80
70
12 ft.
120
110
100
90
8 ft.
140
130
120
110
400 lb.
600 lb.
800 lb.
1000 lb.
Gate Weight
Ga
te
Opening Length
(Estimated number of cycles based on use with a transformer)
Available Through:
������������ ������ �������
�