Справочник Пользователя для OKI fax 5050
28
Faxing: Dial Directories
7
Enter the Location ID. This is a descriptive title up to 16
characters long. Refer to the instructions below.
characters long. Refer to the instructions below.
To Do This
Use
Enter numbers
Numeric keypad (press once)
Enter spaces
Space One Touch key
Enter hyphens (-)
Hyphen key
Enter alphabet characters
Locate the character you want on the numeric
keypad. Press that key repeatedly until the
character appears in the display.
character appears in the display.
Enter a unique character
Press the 0/Unique key repeatedly until
the character you want appears in the display.
The following characters are available: ! # & ‘ ( )
* + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.
The following characters are available: ! # & ‘ ( )
* + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.
Enter two successive
Press the No © key to move to the next
letters/numbers on
character.
the same key.
Move the cursor to
Yes § and No © keys
make corrections
8
Press the Start key. The display shows
NO=<OR LOCATION> for about three seconds.
NO=<OR LOCATION> for about three seconds.
9
Enter the optional alternate fax number, if desired. Refer
to the instructions following Step 5.
to the instructions following Step 5.
1 0
Press the Start key to finish programming the
One Touch key. The display shows LOCATION
PROGRAMMING.
One Touch key. The display shows LOCATION
PROGRAMMING.
1 1
To continue programming One Touch keys, go
back to Step 3. If you are finished programming, press
the Select Function key.
back to Step 3. If you are finished programming, press
the Select Function key.
1 2
Lift off the plastic cover above the One Touch label. Using
a pencil, write in the location name for your One Touch
key(s). Then replace the cover.
a pencil, write in the location name for your One Touch
key(s). Then replace the cover.
One Touch Parameters
If you are experiencing problems communicating with a
remote location in a very noisy telephone area, set up a
One Touch key for that location and try turning Echo
Protection on for that One Touch key. This helps the ma-
chine overcome noise and echo problems on the phone
line.
remote location in a very noisy telephone area, set up a
One Touch key for that location and try turning Echo
Protection on for that One Touch key. This helps the ma-
chine overcome noise and echo problems on the phone
line.
See the Problem Checklist sections for other suggestions.
1
Press the Select Function key.
2
Press the 9/User Program One Touch key.
The display shows 1:FUNC. PROGRAMMING.
The display shows 1:FUNC. PROGRAMMING.
3
Press the Yes
§ key.
The display shows FUNCTION NO. [ ].
4
Using the numeric keypad, enter 23.
The display shows 23:ONE TOUCH PARAM
YES [OT] NO[
The display shows 23:ONE TOUCH PARAM
YES [OT] NO[
©
].
5
Press the One Touch key for the location whose
settings you want to change. The display shows ECHO
PROTECTION, [OFF].
settings you want to change. The display shows ECHO
PROTECTION, [OFF].
6
Press the No
©
key to switch Echo Protection on.
7
Press the Yes
§ key to confirm your selection.
The display shows 23:ONE TOUCH PARAM. [ ].
Of5050hw.pm6
4/15/98, 9:31 AM
28