Справочник Пользователя для OKI fax 5050
Faxing: Dial Directories
31
3
On the numeric keypad, press the # key. The display
shows GROUP SETTING.
shows GROUP SETTING.
4
Using the numeric keypad, enter the two-digit group
number you want to program. You can use numbers
from 01 to 10.
number you want to program. You can use numbers
from 01 to 10.
5
The display shows the number of your current group and
SELECT LOC.(S).
SELECT LOC.(S).
6
You can now add a location to your group (or delete a
location from it). Refer to the instructions below.
location from it). Refer to the instructions below.
To Do This
Use
Add a One Touch
Press the One Touch key.
location
Press Yes
§ to add it to the group.
Add an Auto Dial
Press Auto Dial. Enter the 2-digit Auto location
Dial number. Press Yes
Dial number. Press Yes
§ to add it to
the group.
Delete a previously
Press the One Touch key. Press No © added
One Touch
to delete it from the group.
location
Delete an Auto Dial
Press the Auto Dial key. Enter the 2-digit
location
Auto Dial number. Press No © to delete
it from the group.
it from the group.
Search for a location
Press the Search key continuously until by name
to add or delete
the location you want appears. Press
Yes
§ to add it to the group.
Press No © to delete it.
7
After you have completed your selection by pressing Yes
§
or No
©
, the display shows SELECT LOC. again. Continue
to add or delete locations from your group. Each group can
contain up to a maximum of all of the One Touch and Auto
Dial locations available on your OKIFAX.
contain up to a maximum of all of the One Touch and Auto
Dial locations available on your OKIFAX.
8
When you are finished programming your group, press the
No
No
©
key. The display shows LOCATION PROGRAM-
MING.
9
To program another group, go back to Step 3.
If you are finished, press the Select Function key.
If you are finished, press the Select Function key.
Of5050hw.pm6
4/15/98, 9:32 AM
31