Справочник Пользователя для Metra Electronics 99-7423
99-7423 DASH DISASSEMBLY
NISSAN ALTIMA 2007-2011
A
1
D
isconnect the negative battery ter-
minal to prevent an accidental short
circuit.
circuit.
1
Unclip and remove trim panel
between the shifter and the radio/ cli-
mate control panel. (Figure A)
between the shifter and the radio/ cli-
mate control panel. (Figure A)
2
3
Continue to kit assembly.
B
PASS
AIR BAG
C
Remove (2) Phillips screws exposed
behind panel below radio/climate
control panel. (Figure A)
behind panel below radio/climate
control panel. (Figure A)
4 Unclip and remove the climate control
vent trim panel then remove (2)
Phillips screws exposed behind panel.
(Figure B)
Phillips screws exposed behind panel.
(Figure B)
5 Unclip, unplug and remove entire
radio/climate control panel. (Figure B)
6 Remove (5) T-20 Torx screws securing
the radio/climate control brackets then
unclip and remove the climate control.
(Retain the factory climate controls for
reuse during kit assembly.) (Figure C)
unclip and remove the climate control.
(Retain the factory climate controls for
reuse during kit assembly.) (Figure C)