Справочник Пользователя для Integra dps-5.4
14
Front & Rear Panels—Continued
A
IR IN/OUT (21)
The IR IN connector can be used to connect a com-
mercially available IR receiver, which can be used
to pickup signals from the remote controller when
the DPS-5.4 is located in another room, installed in
a rack, or is out of range of the remote controller
The IR OUT connector can be used to connect a
commercially available IR emitter, which can be
used to pass remote controller signals received by
the IR IN along to other AV components.
mercially available IR receiver, which can be used
to pickup signals from the remote controller when
the DPS-5.4 is located in another room, installed in
a rack, or is out of range of the remote controller
The IR OUT connector can be used to connect a
commercially available IR emitter, which can be
used to pass remote controller signals received by
the IR IN along to other AV components.
B
OPTICAL DIGITAL AUDIO OUTPUT [19]
This optical digital audio output can be connected
to an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
to an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C
COAXIAL DIGITAL AUDIO OUTPUT [19]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
D
jacks [20]
These
(Remote Interactive) connectors can be
connected to the
connectors on your other Inte-
gra/Onkyo AV components for interactive control.
For remote control operation, you must make an
analog RCA/phono connection between your DPS-
5.4 and the other AV component, even if they are
connected digitally.
For remote control operation, you must make an
analog RCA/phono connection between your DPS-
5.4 and the other AV component, even if they are
connected digitally.
E
ANALOG AUDIO OUTPUT [18]
These RCA/phono connectors can be connected to
the analog audio inputs on your TV, hi-fi amp, AV
receiver.
the analog audio inputs on your TV, hi-fi amp, AV
receiver.
F
RS 232
This RS-232 port can be connected to an external
controller.
controller.
G
COMPONENT 2 VIDEO OUTPUT [19]
These BNC connectors can be used to connect
a TV or projector with BNC component video
inputs.
a TV or projector with BNC component video
inputs.
H
COMPONENT 1 VIDEO OUTPUT [19]
These RCA/phono connectors can be used to con-
nect a TV, projector or AV receiver with component
video inputs.
nect a TV, projector or AV receiver with component
video inputs.
I
VIDEO OUTPUT [18]
These RCA/phono connectors can be used to con-
nect TVs, projectors or AV receivers with composite
video inputs.
nect TVs, projectors or AV receivers with composite
video inputs.
J
S VIDEO OUTPUT [19]
These connectors can be used to connect TVs or
projectors with S-Video inputs.
projectors with S-Video inputs.
K
AC INLET [22]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
other of the power cord should be connected to a
suitable wall outlet.
Rear Panel
1 2
4
3
5
6
7
8
9J
K