Справочник Пользователя для Infiniti m45

convenience

41

Automatic Drive Positioner Memory System 

Driver’s Seat, Steering & Outside Mirrors

When programmed, the Automatic Drive Positioner can adjust the driver’s seat, 
steering column, and outside mirrors to two memorized positions.

1

  Push the ignition switch to the ON position. Keep the transmission in P (PARK).

2

  Adjust the driver’s seat, steering wheel, and outside mirrors to the  

desired positions.

3

 Press 

the 

SET button. 

4

  Within 5 seconds, press Memory button 1 or 2 and hold down for at least 1 

second. The indicator light on the Memory button you select will illuminate 
solid for approximately 5 seconds. Seat/steering/mirror memory is now 
set to your preference.

5

  Link the seat/steering/mirror memory to your Intelligent Key. While 

the indicator light on the Memory button is illuminated (see step 4, 
above), press the UNLOCK   button on your Intelligent Key. The driver’s 
seat, steering column and outside mirrors will move to the memorized 
position with the indicator light flashing, and then the light will stay on for 
approximately 5 seconds. The memory is now matched to the Intelligent 
Key. You may set the second seat/steering/mirror memory positions to 
your other Intelligent Key by repeating the steps above.

Note: After step 5 is performed one time to link the seat/steering/mirror memory to your 
Intelligent Key, you DO NOT need to perform this step again if new seat/steering/mirror memory 
positions are saved in the future. New memory positions are automatically linked to your 
Intelligent Key after step 5 is performed one time.

Entry/Exit Function

The Entry/Exit function is designed so that the driver’s seat will automatically 
move BACKWARD and the steering wheel UP to ease entering and exiting the vehicle.

This feature is activated when the ignition switch is in the LOCK (OFF) position 
and the driver’s door is opened.