Справочник Пользователя для Hitachi 27cx21b

HOOK-UP CABLES AND CONNECTORS 

10 

Most video/audio connections between components can be made with shielded video and audio cables that have 
phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be 
purchased from most stores that sell audio/video products. Below are illustrations and names of common 
connectors. Before purchasing any cables, be sure of the output and input connector types required by the 
various components. Also make sure the cables are the correct length. 

  

 

This outdoor antenna cable must be  

 

For connecting RF signals (antenna or cable TV) 

connected to an antenna adaptor  

 

to the antenna jack on the television. 

(300-Ohm to 75-Ohm).   

 

 

 

 

 

Used on all standard video and audio  

 

This connector is used on camcorders, VCRs, 

cables which connect to inputs and  

 

and laser disc players with an S-Video feature 

outputs located on the Television's rear    

in place of the standard video cable to produce a 

jack panel and front control panel. 

 

high-quality picture. 

ANTENNA CONNECTIONS 
These sets are equipped with one VHF/UHF antenna terminal. The VHF/UHF terminal can be used for normal 
TV, cable TV (CATV), a TV game, etc. 

1. VHF (75 Ohm) antenna/CATV 
When using a 75 Ohm coaxial cable system, disconnect the VHF adaptor from the 75-Ohm receptacle and 
connect the outdoor antenna or CATV cable to a VHF 75 ohm 

receptacle.

 

2. VHF (300 Ohm) antenna/UHF antenna 
When using a 300-Ohm twin lead from an outdoor antenna disconnect the (VHF or UHF) indoor antenna leads 
from screws of the (VHF or UHF) adaptor, and connect outdoor (VHF or UHF) antenna leads to these screws of a 
(VHF or UHF) adapter. 

 

3. When both VHF and UHF antennas are connected 
Attach an optional ANTENNA MIXER to the TV antenna terminal and connect the cables to the ANTENNA 
MIXER.