Справочник Пользователя для Integra dps-8.3

54

■ Adjusting the picture quality settings

1 Use the cursor button (

3) to select [Start] then press

ENTER.

2 Use the cursor button (

∞) to select [Video Setup] then

press ENTER.

3 Use the cursor buttons (

2/3) to select the setting to [On] or

[Off].

4 Use the cursor buttons (

5/∞) to select the setting to adjust.

You can adjust any or all of the following picture quality
factors:

• Prog. Motion – When using progressive scan, this adjusts

the motion and still picture quality.

• PureCinema – When watching DVD movies, PureCinema

optimizes the picture quality. The default setting is [Auto1],
but if the picture appears unnatural, then set to [Auto2],
[On] or [Off] as desired and adjust the Prog. Motion setting.

• YNR – Adjusts the amount of noise reduction (NR) applied

to the Y (brightness) component.

• CNR – Adjusts the amount of noise reduction (NR) applied

to the C (color) component.

• MNR (Mosquito Noise Reduction) – Adjusts the amount of

noise reduction applied to the mosquito noise (video
artifacts on the edge of the image resulting from MPEG
compression).

• BNR (Block Noise Reduction) – Adjusts the amount of

noise reduction applied to the block noise.

• Sharpness High – Adjusts the sharpness of the high-

frequency (finely detailed) elements in the picture.

• Sharpness Mid – Adjusts the sharpness of the mid-

frequency (less detailed) elements in the picture.

• Detail – Adjusts how sharp edges appear in the picture.
• White Level – Adjusts the intensity of white in the picture.
• Black Level – Adjusts the intensity of black in the picture.
• Black Setup – For correction of floating black color.
• Gamma – Adjusts the brightness of the darker images in

the picture.

• Hue – Adjusts the overall color balance between red and

green.

You can either select a preprogrammed setting designed to
match certain program types or make adjustments to match
your own preferences and save them in the player’s memory.
Make changes to the [Video Adjust] setting in the Setup
screen Video 2 menu.

■ Selecting a preprogrammed setting

1 Use the cursor button (

3) to select [Start] then press

ENTER.

2 Press ENTER.

TV (CRT) (Factory Setting)

Optimized setting for a standard television set.

Optimized for a plasma display.

Optimized for a professional monitor.

These are user programmable settings. See “Adjusting the
picture quality settings” on pages 54 and 55 for more information.

3 Use the cursor buttons (

2/3/5/∞) to select one of the

preprogrammed picture quality settings.

If there is a DVD or Video CD playing, the effects of each setting
can be viewed while it is highlighted on the screen. This may be
useful in selecting an appropriate setting.

4 Press ENTER.

The new selection is set.

• You may also press the Picture button on the remote control to

display the preprogrammed settings menu.

• Each picture quality setting is defined by a number of individual

settings, described in “Adjusting the picture quality settings” on
this page and page 55.

• Depending on the disc and the TV/monitor, you may not see the

effect clearly.

• If [Letter Box (4:3)] or [Pan & Scan] is selected, there may be

cases when the screen automatically changes to wide (16:9) after
entering the [TV Screen] setting. This is not a malfunction. Close
the [TV Screen] setting and the screen returns to its set size.