Справочник Пользователя для Garmin g1000 mooney vhfnav com pilots guide m20
![Garmin](https://files.manualsbrain.com/attachments/994f895c1fe9ba298f5fc917e3283ea0d22ac77e/common/fit/150/50/527c517f51a09dedc2e7b1a673b0cf7834e289874ec6cfcd6322d2baf6d7/brand_logo.png)
Garmin G1000 VHF NAV/COM Pilot’s Guide for Mooney M20M & M20R
190-00445-01 Rev. A
4-11
OPERATION – NAV
SELECTING A NAV RADIO
The desired NAV radio is selected using the CDI soft-
key located on the PFD. The three navigation modes that
can be selected are:
can be selected are:
• VOR1 (or LOC1) – If NAV1 is selected, a single
green arrow (shown) labeled either ‘VOR1’ or
‘LOC1’ is displayed on the HSI and the active NAV1
frequency is displayed in green.
‘LOC1’ is displayed on the HSI and the active NAV1
frequency is displayed in green.
• VOR2 (or LOC2) – If NAV2 is selected, a double
green arrow (not shown) labeled either ‘VOR2’ or
‘LOC2’ is displayed on the HSI and the active NAV2
frequency is displayed in green.
‘LOC2’ is displayed on the HSI and the active NAV2
frequency is displayed in green.
• GPS – If GPS mode is selected, a single magenta
arrow (not shown) appears on the HSI and neither
NAV radio is selected.
NAV radio is selected.
NOTE: In GPS mode, both active NAV frequencies
are displayed in white.
are displayed in white.
Figure 4.3.6 Selecting a NAV Radio
The NAV radio is
selected by the CDI
softkey.