Справочник Пользователя для Garmin g1000 mooney vhfnav com pilots guide m20
Garmin G1000 VHF NAV/COM Pilot’s Guide for Mooney M20M & M20R
190-00445-01 Rev. A
4-4
INTRODUCTION
CONTROLS
The NAV Frequency window is controlled by knobs
and keys on the left, the COM Frequency window by
knobs and keys on the right.
knobs and keys on the right.
The NAV controls:
• VOL/PUSH ID knob
– Turn to adjust the NAV radio volume level.
– Press to turn the Morse code ID ON and OFF.
– Press to turn the Morse code ID ON and OFF.
• Frequency Transfer key
– Press to transfer the NAV frequencies between
the active and standby fields.
• Dual NAV tuning knob
– Turn to tune a NAV frequency in the NAV
tuning box (large knob for MHz; small knob
for kHz).
for kHz).
– Press to transfer the NAV tuning box between
the NAV1 and NAV2 radios.
Figure 4.1.4 NAV/COM Controls
Frequency Transfer Keys
Dual NAV
Knob
Dual COM
Knob
VOL/PUSH
ID Knob
VOL/PUSH
SQ Knob
NAV Controls
COM Controls
• Turn to tune desired
frequencies.
• Press to change tuning box
positions.
The COM controls:
• VOL/PUSH SQ knob
– Turn to adjust the COM radio volume.
– Press to turn automatic squelch ON and OFF.
– Press to turn automatic squelch ON and OFF.
• Frequency Transfer key
– Press to transfer the COM frequencies between
the active and standby fields.
– Press and hold for two seconds to tune the
emergency frequency (121.500 MHz) in the
active COM field.
active COM field.
• Dual COM tuning knob
– Turn to tune a COM frequency in the COM
tuning box (large knob for MHz; small knob
for kHz).
for kHz).
– Press to transfer the COM tuning box between
the COM1 and COM2 radios.