Справочник Пользователя для Metra Electronics 99-5824ch

Locate the factory wiring harness in 
the dash.  Metra recommends using 
the proper mating adapter from 
Metra or AXXESS.  Re-connect the 
negative battery terminal and test 
the unit for proper operation.

Slide the DIN cage into the Radio 
Housing and secure by bending the 
metal locking tabs down.  (Fig. A)

Snap the pocket into the bottom 
opening of the radio housing.  
(Fig. B)

Slide the aftermarket head unit into 
the cage and secure.  (Fig. C)

Mount the radio housing assembly 
into the sub dash using the supplied 
#8 Phillips screws then clip the radio 
housing trim panel onto the radio 
housing.