Справочник Пользователя для Hitachi 50EX13KX

Скачать
Страница из 41
HOOK-UP CABLES AND CONNECTORS 
- 11 - 
Most video/audio connections between components can be made with shielded video and audio 
cables that have phono connectors. For best performance, video cables should use 75-Ohm 
coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. 
Below are illustrations and names of common connectors. 
Before purchasing any cables, be sure of the output and input connector types required by the 
various components. Also make sure the cables are the correct length. 
 
300-Ohm Twin Lead Connector 
This outdoor antenna cable must be connected to an antenna adaptor (300-Ohm to 75-Ohm). 
 
Phono Connector 
Used on all standard video and audio cables which connect to inputs and outputs located on the 
Television's rear jack panels. 
 
"F" Type 75-Ohm Coaxial Antenna Connector 
For connecting RF signals (antenna or cable TV) to the antenna jack on the television. 
 
S-Video (Super Video) Connector 
This connector is used on camcorders, VCRs, and laser disc players with an S-Video feature in  
place of the standard video cable to produce a high-quality picture. 
ANTENNA CONNECTIONS TO REAR JACK PANEL 
VHF (75-Ohm) antenna/CATV(cable TV) 
When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV coaxial cable 
to the VHF/UHF 75-Ohm terminal. 
 
VHF (300-Ohm) antenna/UHF antenna 
When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or UHF antenna